Cellular forums Home > Archive > Cellular GSM Technology > July 2005 > GSM Tower Strength









You are viewing an archived Text-only version of the thread. To view this thread in it's original format and/or if you want to reply to this thread please [click here]

 

Author GSM Tower Strength
SteveC

2005-07-24, 1:57 pm

We have a new GSM tower here but it rarely registers full strength even when
you are under it. I have driven all around and out in every direction. The
TDMA would always go to the top. Is it that it is new and not up to full
strength yet? Is there a site on internet where you can find GSM tower
locations?


R. P.

2005-07-24, 1:57 pm

"SteveC" <src.nospam@conklan.us> wrote:
> We have a new GSM tower here but it rarely registers full strength
> even when you are under it. I have driven all around and out in every
> direction. The TDMA would always go to the top. Is it that it is new
> and not up to full strength yet? Is there a site on internet where
> you can find GSM tower locations?


How do you know that your phone company's transmitter is on it or
whether it is in operation or just in pre-op testing phase?

Rudy

Mark

2005-07-24, 1:57 pm


How do you know that tower is for your carrier?


SteveC Wrote:
> We have a new GSM tower here but it rarely registers full strength even
> when
> you are under it. I have driven all around and out in every direction.
> The
> TDMA would always go to the top. Is it that it is new and not up to
> full
> strength yet? Is there a site on internet where you can find GSM tower
> locations?



--
MarkPosted via T-MobileInfo.com www.t-mobileinfo.com

Todd Copeland

2005-07-24, 1:57 pm

"SteveC" <src.nospam@conklan.us> wrote in message
news:V_BEe.25127$dz.12094@bignews4.bellsouth.net...
> We have a new GSM tower here but it rarely registers full strength even

when
> you are under it. I have driven all around and out in every direction.

The
> TDMA would always go to the top. Is it that it is new and not up to full
> strength yet? Is there a site on internet where you can find GSM tower
> locations?


Usually your carrier will provide some type of map with the location of
their coverage areas. If it's their tower, you should see a cone of good
coverage around it. Also, depending on the frequency, the signal from the
tower can be very weak right under and next to the tower, picking up in
strength as you start moving away from it.


SteveC

2005-07-24, 11:48 pm

The info from Cingular is that Unicel (formerly Cellular 1) operates the
tower and that that Cingular leases from it. Unicel Customer Service
confirms that it is their tower. It transmits TDMA and is being converted
to GSM. Apparently, it is doing both right now. Cingular has another tower
a few miles away that they built which will be operated by Unicel and will
be GSM. Unicel is a rural carrier which has announced it will convert fully
to GSM within 2 years. As a GSM tower, it does not seem to put out a strong
signal. I am hoping that this is because it is newly converted and they are
still working on it. I have 4 weeks during which I can cancel my contract
with Cingular if I am dissatisfied. I could go with Unicel instead but if
they are going to use the same towers, it really makes no difference.
"R. P." <r_pol12gar@hotmail.com> wrote in message
news:TsOdnZnV05drjH7
fRVn-hw@comcast.com...
> "SteveC" <src.nospam@conklan.us> wrote:
>
> How do you know that your phone company's transmitter is on it or whether
> it is in operation or just in pre-op testing phase?
>
> Rudy



SteveC

2005-07-24, 11:48 pm

Thanks. I always got a 4 out of 5 and sometimes a 5 from the tower at TDMA.
My GSM varies from 1-6 on a 7 scale. It is the variation that slays me. It
seems weaker nearer the tower as you say. I didn't notice that so much with
TDMA. GSM phones are newer and may just be more sensitive to changes than
the TDMA technology was. I do think that I can make phone calls more
reliably with a 1 or 2 with GSM where as I needed a 3 on TDMA. The weak
signals were often not good enough on TDMA. Is that your experience?
"Todd Copeland" <todd@copelandhome.net> wrote in message
news:eyLEe.3073$0C.1738@newsread3.news.pas.earthlink.net...
> "SteveC" <src.nospam@conklan.us> wrote in message
> news:V_BEe.25127$dz.12094@bignews4.bellsouth.net...
> when
> The
>
> Usually your carrier will provide some type of map with the location of
> their coverage areas. If it's their tower, you should see a cone of good
> coverage around it. Also, depending on the frequency, the signal from the
> tower can be very weak right under and next to the tower, picking up in
> strength as you start moving away from it.
>
>



John Navas

2005-07-25, 11:48 pm

[POSTED TO alt.cellular.gsm - REPLY ON USENET PLEASE]

In <V_BEe.25127$dz.12094@bignews4.bellsouth.net> on Sat, 23 Jul 2005 20:19:11
-0500, "SteveC" <src.nospam@conklan.us> wrote:

>We have a new GSM tower here but it rarely registers full strength even when
>you are under it. I have driven all around and out in every direction. The
>TDMA would always go to the top. Is it that it is new and not up to full
>strength yet? Is there a site on internet where you can find GSM tower
>locations?


How do you know you're not measuring a different tower that's farther away?

--
Best regards, HELP FOR CINGULAR GSM & SONY ERICSSON PHONES:
John Navas <http://navasgrp.home.att.net/#Cingular>
Frater Mus

2005-07-27, 11:48 pm

On 2005-07-24, <src.nospam@conklan.us> wrote:

> Thanks. I always got a 4 out of 5 and sometimes a 5 from the tower at TDMA.
> My GSM varies from 1-6 on a 7 scale. It is the variation that slays me. It
> seems weaker nearer the tower as you say. I didn't notice that so much with


Although it is likely not a factor in this situation, it is possible
to overload the front-end of a receiver by immediate proximity to the
transmitting signal.

Most often seen by ham operators and scanner fiends who are right next
to the person who is transmitting. Counter-intuivive, I know.

--
http://cbsrmt.mousetrap.net/RMTdb/ CBS Radio Mystery Theater database
http://greyhound.mousetrap.net/altus/ Altus, retired racer

John McCain 2008 + http://en.wikipedia.org/wiki/Instant-runoff_voting
Toomas

2005-07-28, 5:48 pm

No. Signal IS weaker near tower, specially when tower cover large area.
That because how aerials are designed. Where I work I get weak signal
and never closest - aerials are on the roof.



"Frater Mus" < FraterMus2005@mouset
rap.net> wrote in message =
news:42e7d2db$0$1446
0$8b463f8a@news.nationwide.net...
> On 2005-07-24, <src.nospam@conklan.us> wrote:
>=20
at TDMA.=20[color=darkred]
me. It=20[color=darkred]

much with=20[color=darkre
d]
>=20
> Although it is likely not a factor in this situation, it is possible
> to overload the front-end of a receiver by immediate proximity to the
> transmitting signal.=20
>=20
> Most often seen by ham operators and scanner fiends who are right next
> to the person who is transmitting. Counter-intuivive, I know.
>=20
> --=20
> http://cbsrmt.mousetrap.net/RMTdb/ CBS Radio Mystery Theater =

database
> http://greyhound.mousetrap.net/altus/ Altus, retired racer
>=20
> John McCain 2008 + http://en.wikipedia.org/wiki/Instant-runoff_voting

LinkBot





Other Archives: Real Estate forum archive | Web Design archive | Software support archive | PC Hardware reviews archive | Medical topics archive

Copyright 2004 - 2008 cellphonetopics.com